Charging - Doro PhoneEasy 612 User Manual

CAUTION
Only use batteries, charger and accessories that have been approved
for use with this particular model. Connecting other accessories may
be dangerous and may invalidate the phones type approval and
guarantee.
When the battery is running low,
heard. To charge the battery, connect the mains adapter to a wall socket
and to the charging socket y.
is displayed briefly when the charger is connected to the phone, and
when it is disconnected. The battery charge indicator will be ani-
mated while charging. It takes approximately 3 hours to fully charge the
battery.
is displayed on the screen when charging is completed. If the phone
is turned off when the charger is connected to the phone only the battery
charge indicator will be shown on the display.
Note! To save power the LCD backlight goes off after a while. Press any
button to illuminate the display. Full battery capacity will not be reached
until the battery has been charged 3–4 times. Batteries degrade over
time, which means that call time and standby time will normally
decrease with regular use.
Save energy
When you have fully charged the battery and disconnected the charger
from the device, unplug the charger from the wall outlet.
English

Charging

is displayed and a warning signal is
2