Table of Contents
Advertisement
Auto Program (Setting TV Channels)
9
Y
our TV can set itself for local area (or
Cable TV) channels. This makes it
easy for you to select only the TV stations
in your area when you press CH +/-.
Connect an Antenna or Cable TV signal
before starting AUTO PROGRAM. Details
are on panels 1-2.
1
Press MENU to see the menu.
Press 8 or 9 to scroll through
2
the menu until SETUP is high-
lighted.
Press : to enter the SETUP
3
menu.
Press 8 or 9 to scroll through
4
the SETUP menu until AUTO
PROGRAM is highlighted.
Press : to start scanning and
5
memorizing channels.
When Auto Programming is
complete, CHANNELS ARE SET
will appear on the screen. Then
the SETUP menu will reappear
briefly.
6
Press STATUS/EXIT to
remove the on-screen menu.
Helpful Hints
Press the CH +/- buttons to see
which channels are in the TV's
memory.
To delete unwanted channels from
the TV's memory, see CHANNEL
EDIT on panel 10.
7
8
9
VOL+
6
EXIT
Advertisement
Table of Contents
