Hooking Up Your Tv - Magnavox MT1331B Owner's Manual

H
OOKING
A
NTENNA
C UHF/VHF
OMBINATION
A combination antenna
receives normal broadcast
channels (VHF 2-13 and UHF
14-69). Your connection is easy
since there is only one 75Ω
(ohm) antenna jack on the
back of your TV - and that's
where the antenna goes.
Combination
VHF/UHF
Antenna
(Outdoor or
Indoor)
S UHF/VHF
EPARATE
Y ou may have two separate
antennas. One antenna is
for VHF channels (2-13) and
the other antenna is for UHF
channels (14-69).
For homes with separate
UHF/VHF antennas, you will
need an optional combiner
before you can connect the
antennas to the TV.
Outdoor UHF Antenna
(Twin-lead 300Ω)
Outdoor VHF
Antenna
(Twin-lead 300Ω)
OR
Outdoor VHF
Antenna
(Round cable 75Ω)
U Y TV (A
P OUR
If your antenna has a
round connector (75Ω),
then you're ready to connect it
to the TV. Go to step 2.
If your antenna has flat
twin-lead wire (300Ω), you
first need to attach the antenna
wires to the screws on a 300
to 75Ω adapter (not supplied).
Twin-lead
Wire
OR
Round Cable
75Ω
Attach the separate
UHF and VHF antennas to
the correct screws on the
combiner (not supplied).
UHF/VHF
Combiner
(not supplied)
Twin-lead
Wire
U H
F
3 0 0
V H F
75-300Ω Adapter
/C
NTENNA ABLE
Push the round end of
the adapter (or cable) onto
the ANT(enna) IN jack on
the back of the TV. If the
round end of the adapter or
cable is threaded, screw it
down tight.
300 to 75Ω
Adapter
Push the round end of the
combiner onto the ANT(enna)
IN jack on the back of the TV.
Round
Ω
End
- 2 -
C )
ONNECTIONS
ANT.IN
Back of TV
ANT.IN
Back of TV
S
MART
H
ELP
To set the
TV to select only
the channel num-
bers in your area,
see Auto Install
(page 4).