1. Manuals
  2. Brands
  3. KJB Manuals
  4. Security System
  5. WF1120
  6. User manual

KJB WF1120 User Manual

Wi-fi home monitoring system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

User manual

Please read the user manual carefully before use.

Advertisement

Table of Contents
loading

Related Manuals for KJB WF1120

Summary of Contents for KJB WF1120

  • Page 1: User Manual

    User manual Please read the user manual carefully before use.

  • Page 2: Product Description

    1 Product Description 2. Installation Camera Status System start up- LED Flash Yellow Binding mode-LED Flash Green Slowly (flashes once per second) Connecting to Wi-Fi-LED Flash Green Fast (flashes three times per second) Camera functioning properly-LED is on Green Continuously...

  • Page 3: App Setup

    Note: There will be a voice prompt to advise the user and help set up the device. The lights and voice prompts can be turned on and off by using the KJB Wi-Fi APP. See below screenshot: Note: To reset factory settings, locate the reset button on the bottom of the device. Press and hold the button for 3-5 seconds.
  • Page 4 For Android Users: Method 1: Get APP Visit any APP market and search for “KJB Wi-Fi”. Download and install. The APP is currently available in The Google PlayStore. Method 2: Scan the APP QR code: Use your phone or tablet to scan the QR code on packaging.
  • Page 5 Binding Method 1: Sound Wave 1)Point speaker of your phone or tablet towards the microphone on the front of the camera. 2)Make sure you do this in a quiet place without any other sound interference. Keep your phone or tablet steady without moving it for a few seconds during the binding process.

  • Page 6: Video Lock

    5. Playback Click the “Playback” icon and choose the time and day of the video you want to review. Use the Fast Forward/ Pause/ Rewind buttons to scroll through the recorded video. Some block Some block 6. Video Lock The Video Lock function allows the user to watch live and recorded video safely from a password-protected mode.
  • Page 7 7. Sub-Account Management Each camera can support up to 15 accounts (including the Administrator account). Administrator can add and delete sub-account using “Sub-Account Management” function from the Camera Settings screen. Refer to photo below. New sub-account can be setup by clicking on the “Add” button. Existing sub-accounts can be deleted by swiping left on the sub-account that you want to delete and press the “Delete”...

  • Page 8: Infrared Night Vision

    9. Infrared Night Vision Infrared night vision is controlled by the camera system automatically. When there is insufficient lighting, the infrared night vision will be activated. Infrared night vision will automatically shut off when there is enough lighting present. 10. Infrared Alarm This device uses an infrared sensor.
  • Page 9 12 . FAQ’s: 1)Cannot bind Camera Device ・User can only bind when the camera device is in the Binding mode (Green LED flashes once a second). Otherwise, you cannot bind a camera device if you are not in binding mode. ・Make sure when using the Sound Wave binding, the room is quiet and the speaker on the phone or tablet is close to the microphone in front near the camera as shown in picture above.

  • Page 10: Specifications

    Tips: You can just pull-down the screen of your phone or tablet to refresh the camera list. Supports a 32GB micro memory card, and stores videos up to 24days. You can replay video about 10 minutes after a micro memory card has been inserted.

Table of Contents