Fault Messages; Flue Terminal - Braemar ECOSTAR SH18 Operating Instructions Manual

Your Braemar Ecostar space heater uses inbuilt fault diagnosis
software to help determine the source of a fault. If the heater detects a
fault the heater will turn off and the control panel indicators will flash to
indicate the fault code (FC) and the reset action required. Please quote
this fault code if requesting a service call - this may enable the problem
to be fixed over the phone.
- Red indicators flashing show fault code.
- Green indicator flashing - USER RESET - press and hold ON/OFF
button until indicators go off. Press ON/OFF button to turn heater
back on.
- Orange and green indicator flashing - SERVICE RESET - service
call required.
FC Indicator flashes
1
2
5
7
9
10
11
12
13
15
19
If a fault is repeated after a USER RESET or after switching the
power to the heater off and back on a service call may be required.

Fault messages

RED
Potential remedy
User reset.
Check flue terminal is not
obstructed. User reset.
Service call.
Check gas is turned on. User reset.
Service call.
Check inlet and outlet louvres are
not obstructed. User reset.
User reset.
User reset.
Check flue terminal is not
obstructed. User reset.
Check inlet and outlet louvres are
not obstructed. User reset.
Service call.
GREEN
ORANGE
Page 6