Advertisement
6
Installation
6.1. General warnings
The installer should read this instruction manual carefully before
installing the machine. The machine must be installed by qualified,
authorized staff, respecting the applicable safety and hygiene
guidelines.
!
6.2. Important warnings
The operator must be a responsible adult and under no cir-
cumstances a minor or a person unable to deal with said respon-
sibility.
When handling the grinder, the following precautions must be
taken into consideration:
• Do not handle with bare feet
• Hands or feet must not be wet
• Do not submerge the machine in water
• Do not expose the machine to sunlight or other atmospheric
conditions
• Never insert any object into the coffee input or output
openings when the machine is turned on. (Please bear in mind
that when the grinder stops, the burrs continue to turn for a
few seconds.)
• To disconnect the grinder, always pull out the plug and never
the electrical cable, to avoid the possibility of a short circuit.
6.3. Putting the grinder into place
The grinder should be installed on a smooth flat surface. In order
to guarantee the optimum performance of the appliance, the
minimum dimensions of the work place should be as follows:
Height (in / mm.)
K-3 / K-3 Elite &
25.6 / 650
K-3 Touch
With mini-hopper
22.6 / 575
6.4. Installation of the coffee grinder
Before connecting the coffee grinder, check the following:
• That the data on the features label coincides with those of the
power supply.
Width (in / mm.)
Depth (in / mm.)
12.1 / 310
14.4 / 365
Advertisement
