Safety - Welding Industries Malaysia WIM200 Instruction Manual

SAFETY OBSERVATION
Handing
Remove cylinder before lifting
Heat
Do not burn yourself!
Wear gauntlets and use tongs
Dress
Correct Grade of
glass
(Ew9, 10&11)
Clear Goggles
for chipping and
wire brushing
Leather gauntlets
Dress correctly when welding and
preparing the weld
Electrical
Do not work with cover off
Leave it to the experts
© Welding Industries Malaysia Sdn. Bhd. reserves all rights even in the event of industrial property rights. We reserve all rights of dis-
posal such as copying and passing on to third parties. Specification may vary from country to country.
Handing
Do not lift using handle
Glare
Wear your headshield ( or face
screen) and screen the welding
area
Dust
Torch lead
draped over
shoulder
Dark, high
necked
overall
with but-
toned
cuffs
Note: Use only DRY air at a pressure not exceeding 2
bar
Wear goggles and mask when
removing dust with an airline
Electrical
415/230 A.C is supplied to the
p.c.b Isolate unit before removing
covers of p.c.b
Handing
Lift the unit correctly
Fume
Ventilate the welding area to
prevent build-up of gas and fume
Fire
Before commencing welding,
clear the flammable area
Electrical
Do not allow leads to lie in oil,
water or corrosive liquid or
extend them with extension
leads-fit a longer cable
V1.1.06