ENGLISH (Original instructions) SPECIFICATIONS Model HP2050/HP2050F HP2051/HP2051F Speed High High Concrete 20 mm ----- 20 mm ----- Capacities Steel 8 mm 13 mm 8 mm 13 mm Wood 25 mm 40 mm 25 mm 40 mm No load speed (min...
EC Declaration of Conformity Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and Makita declares that the following Machine(s): refrigerators. There is an increased risk of Designation of Machine: electric shock if your body is earthed or grounded.
GEB003-5 16. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves HAMMER DRILL SAFETY away from moving parts. Loose clothes, WARNINGS jewellery or long hair can be caught in moving parts. Wear ear protectors when impact drilling. 17.
Reversing switch action FUNCTIONAL DESCRIPTION 1. Reversing CAUTION: switch lever Always be sure that the tool is switched off and • unplugged before adjusting or checking function on the tool. Switch action 1. Lock button 2. Speed control 002991 screw This tool has a reversing switch to change the direction 3.
Selecting the action mode Installing or removing drill bit For Model HP2050, HP2050F 1. Action mode changing lever 1. Chuck key 002692 This tool has an action mode change lever. For rotation 002694 with hammering, slide the action mode change lever to To install the bit, place it in the chuck as far as it will go.
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Tungsten-carbide tipped hammer bit • Phillips bits • Slotted bits •...