Specifications - Sony 158NVU44 Quick Start Manual

4
Remove the 4 screws of the circuit
board using a screw driver, then lift
out.
5
Remove the battery.
6
Insulate the connector terminal by
wrapping with a tape.
Notes
• Be sure to remove the battery with the case
attached.
• Do not damage the battery with
a
sharp object such
as a screw driver.
o
Specificalions
,
.
.
Main unit
Operating temperature: 5 - 45°C (41 - 113 OF)
Power requirements: DC 5 V •
from supplied USB cable or 12 V /24 V car battery
adapter (negative ground)
Connection terminal:
USB jack
Memory card slot: Memory Stick Duo slot
Speaker:
~28
nun (1.1 in) speaker
Consumption current: Max. 0.8 A
Dimensions: Approx. 106
x
78
x
17 mm
(4.2 x 3.1 x 0.7 in)
(w x h x d, protruding parts excluded)
Mass: Approx. 157 g (5.5 oz)
Monitor
System: Transmissive Liquid crystal display
Dimensions: 3.5 in (4:3)
Approx. 70 x 53, 88 mm
(2.8 x 2.1, 3.5 in) (h x v, d)
Segment: 230,400 (720 x 320) dots
Built-in battery charging time/usage
time
Charging time
With the supplied car battery adapter:
Approx. 4 hours (with unit turned on), or 3 hours
(in standby mode)
With the supplied USB cable:
Approx. 4 hours (in standby mode)
Usage time
Up to 4 hours (depending on usage)
Design and specifications are subject to change
without notice.
• Halogenated flame retardants are not used in the
certain printed wiring boards.
• Halogenated flame retardants are not used in
cabinets.
• Use of rechargeable lithium ion batteries.
11