Vax Dynamo Strike C85-D2-Be User Manual page 12

Let's talk technical
Removing blockages from the TurboTool (some models only)
Slide the locking ring
to remove.
Removing blockages from the hose
Remove the hose from the vacuum cleaner and
telescopic extension tube. Remove any blockage
by inserting a wire coat hanger into the hose.
Lift and separate
the housing.
Using a pair of scissors,
cut any hair or debris free
from around the brushes.
Tabs
Line up the tabs on front of
housing and push together
to refi t. Slide locking ring
into groove to secure.