Vax Dynamo Strike C85-D2-Be User Manual page 10

Taking care of your machine
IMPORTANT: Always switch off and unplug the vacuum cleaner from the electrical socket before assembling,
opening or emptying the dirt container, or before connecting/disconnecting the attachments.
Pre-motor fi lter needs to be cleaned every time you empty the dirt container. Do not use your vacuum cleaner
without all of the fi lters in place.
The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the thermostat will
automatically turn the unit off .
Emptying and cleaning the dirt container
Remove dirt container
by pushing down the dirt
container release button and
lifting the dirt container.
Cleaning the pre-motor fi lter
Lift the dirt bin lid release clip,
in a hinge like manner lift dirt
bin lid.
40˚C 40˚C
!
MAX MAX
Rinse the pre-motor fi lter under
water (Max 40°C).
Hold dirt container over a bin.
Press the dirt release clip at
the bottom of the container,
the dirt release door will open
allowing dirt/debris to fall out.
Lift the pre-motor fi lter and
remove from the dirt container.
24hr
Leave to dry for 24 hours or until fully
dry before placing back in the machine.
Tap the pre-motor fi lter against
a bin to remove any dirt/debris.