Selecting A Different Source From Navigation Screen; Calibrating The Screen - Magnadyne M1-NAV Operation And Installation Manual

M1-NAV 8/4/08 1:34 PM

Selecting a Different Source from Navigation Screen

Selecting a Different Source:
Press the button to leave the navigation
source and return to the last selected source.

Calibrating the Screen

When you first connect the GPS box to the stereo receiver you should adjust the screen to the center
position and calibrate the touch screen.
1. When the navigation system starts up and the
Console menu is displayed, press the Setting
button.
2. Press the Screen Adjust button to enter the
Centering the Screen Adjustment mode.
3. Use the , ,
screen up/down and left/right to center the
screen. When the screen is centered press the
OK button to confirm the screen adjustment.
4. Press the Touch Cali button to enter the
screen's Touch Calibration Adjustment mode.
Page 5
and buttons to move the
5