Summary of Contents for SportDOG Sport Hunter 1325
Page 1
OPERATING GUIDE PLEASE READ THIS ENTIRE GUIDE BEFORE BEGINNING...
Page 2
IMPORTANT SAFETY INFORMATION Explanation of Attention Words and Symbols used in this guide ____________________________________________________________________ This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Page 3
• If the condition persists beyond 48 hours, see your veterinarian. For additional information on bed sores and pressure necrosis, please visit the Support section for remote trainers at www.sportdog.com. These steps will help keep your dog safe and comfortable. Millions of dogs are comfortable while they wear stainless steel contacts.
To get the most protection out of your Two Year Warranty, please register your product within 30 days at www.sportdog.com. By registering, and keeping your receipt you will enjoy the product’s full warranty and should you ever need to call the Customer Care Center, we will be able to help you faster. Most importantly, your valuable information will never be given or sold to anyone.
With proper training, a dog will learn to associate this signal with a command. Like all SportDOG products, this model features adjustable stimulation levels so you can tailor the stimulation level to your dog’s temperament, eliminating the risk of over-correction.
KEY DEFINITIONS REMOTE TRANSMITTER: Transmits the radio signal to the Collar Receiver. It is waterproof and can be submerged in water to a depth of 25 feet. INTENSITY DIAL: Provides multiple levels of stimulation so you can match the correction to your dog’s TRANSMITTER temperament.
Unit is charging Green Light is solid in color while on the charger Unit is fully charged Green Good Light fl ashes once per (charger still connected) second once the battery is completely charged WWW.SPORTDOG.COM...
PREPARE THE COLLAR RECEIVER CHARGE THE COLLAR RECEIVER 1. Lift the rubber cover protecting the Charging Jack. 2. Connect one of the charger connectors to the Charging Jack. 3. Plug the charger into a standard 120/240-volt AC wall outlet. 4. Charge the Collar Receiver for 2 hours for the fi rst charge and every charge thereafter.
Page 9
• The batteries should last for a period of 3-5 years. When a battery needs replacement, you can order a new pack by calling our Customer Care Center at 1-800-732-0144. Please do not open the Collar Receiver or Remote Transmitter until you have received the replacement. WWW.SPORTDOG.COM...
• If the condition persists beyond 48 hours, see your veterinarian. For additional information on bed sores and pressure necrosis, please visit the Support section for remote trainers at www.sportdog.com. These steps will help keep your dog safe and comfortable. Millions of dogs are comfortable while they wear stainless steel contacts.
Contact Points included in your system, or change the stimulation range. If after completing all of these steps your dog still does not indicate he is feeling the static stimulation, please contact the Customer Care Center at 1-800-732-0144. WWW.SPORTDOG.COM...
CHANGING STATIC STIMULATION RANGES The SportHunter ® 1325 Collar Receiver comes with 2 stimulation ranges (low and medium). There are 7 stimulation levels within each range, with 1 being the lowest and 7 being the highest. The default range setting is 2 (medium). To change the range of stimulation, follow these steps: 1.
For example, if mode 5 is desired, adjust the Intensity Dial to Level 5 with the Toggle Switch in the up position. Once the Mode Button has been depressed, the Transmitter Indicator Light will be solid and, once the mode button is released, the Transmitter Indicator Light will fl ash 5 times. WWW.SPORTDOG.COM...
Page 14
Side Button for 3 seconds. *** Remote Launcher: Match your SportHunter ® 1325 Transmitter to your SportDOG Brand ® Launcher Receiver by pressing and holding the Launcher Receiver’s on/off button. When a “P” appears on the Receiver’s LCD, press the Upper Button on your Remote Transmitter.
SportDOG ™ Collar Receivers can be set to respond to either the up or down toggle switch position. A SportDOG Add-A-Dog ® Collar Receiver must be purchased to train a second dog in two-dog mode. Please refer to the back cover for compatible Add-A-Dog Collar Receivers for this system.
PROGRAM THE SYSTEM FOR THREE AND SIX-DOG OPERATION A SportDOG ™ Add-A-Dog ® receiver(s) must be purchased to train additional dogs. Please refer to the back cover for compatible Add-A-Dog Collar Receivers for this system. THREE DOG OPERATION 1. Program the Remote Transmitter to mode 4 or 5 in the toggle switch black/up position (see page 14).
Yes. The SportHunter 1325 is expandable to a maximum of six dogs. ™ ® one dog? SportDOG Add-A-Dog Collar Receivers must be purchased. Please refer to the back cover for a list of compatible Collar Receivers. Can I use the SportHunter 1325 on aggressive We do not recommend any of our products to be used on aggressive dogs.
TROUBLESHOOTING The answers to these questions should help you solve any problem you have with this system. If they do not, please contact the Customer Care Center at 1-800-732-0144, visit our website at www.sportdog.com, or view www.youtube.com/sportdogbrand for support videos.
TEST LIGHT INSTRUCTIONS 1. Turn the Collar Receiver on. 2. Hold the Test Light Contacts to the Contact Points. 3. Press a Static Stimulation Button on the Remote Transmitter. 4. The Test Light will fl ash. NOTE: At higher static stimulation levels, the Test Light will fl ash brighter. 5.
Corporation may cause fi re or explosion. Please call the Customer Care Center at 1-800-732-0144 to avoid invalidating your warranty. This product is protected by the following patents: U.S. Patent Numbers: 6,901,883; 6,459,378; 7,647,545; 7,420,136; 6,184,790; 7,017,524; D573,564 other patents pending. WWW.SPORTDOG.COM...
Need help?
Do you have a question about the Sport Hunter 1325 and is the answer not in the manual?
Questions and answers