Install On A Din Rail - Axis T8008 PS12 Installation Manual

AXIS T8008 PS12 Power Supply
1
Plastic lug
2
Mounting bracket
3
Screw
4
Power supply
6. Connect the power supply. For information about wiring, see Power Supply Cables, on
page 12.

Install on a DIN Rail

The power supply can be installed on a DIN rail using the supplied DIN clip.
Note
It is not possible to use this method to install the power supply in a T98A series cabinet.
1. Attach the DIN clip to the mounting bracket.
2. Attach the power supply to the mounting bracket.
1 2 3
11
4 1