Subscribe to Our Youtube Channel
Related Manuals for Axis AXIS Q87-E
Summary of Contents for Axis AXIS Q87-E
- Page 1 INSTALLATION GUIDE AXIS Q87-E Power Supply 230 V AC AXIS Q87-E Power Supply 120 V AC...
-
Page 2: Contact Information
EN 61000-6-1 residential, commercial and Search by product, category, or phrases light-industry environments. This product fulfills the • report problems to Axis support by logging in to your requirements for immunity according to EN 61000-6-2 private support area industrial environments. - Page 3 • Use only spare parts provided by or recommended by Axis. • Do not attempt to repair the product by yourself, contact Axis or your Axis reseller for ser- vice matters. • This Axis product shall be used in compliance with local laws and regulations.
-
Page 5: Installation Steps
AXIS Q87-E Power Supply 230 V AC & AXIS Q87-E Power Supply 120 V AC Installation Guide This Installation Guide provides instructions for connecting AXIS Q87-E Power Supply 230/120 V AC with AXIS Q87-E Dual PTZ Network Camera Series. Installation Steps 1. -
Page 6: Hardware Overview
Page 6 AXIS Q87-E 230/120 V AC Installation Guide Hardware Overview Power supply lid Cable gland (illuminator cable) Power supply lid screw (4x) Power supply box Cable gland (mains power) Day/night sensor Cable gland (unit power) Connector board... -
Page 7: Install The Power Supply
AXIS Q87-E 230/120 V AC Installation Guide Page 7 Install the Power Supply The mains supply shall be disconnected during installation. The supplied power supply shall be used. Using any other power supply will void the warranty and could leave the unit at a risk. - Page 8 Page 8 AXIS Q87-E 230/120 V AC Installation Guide 4. Connect the pan/tilt power supply to the pan/tilt connector (J4) in the power supply. 5. If using the day/night sensor, connect the illuminator cable to the illuminator connector (J5) in the power supply.
-
Page 9: Connection Diagram
AXIS Q87-E 230/120 V AC Installation Guide Page 9 Connection Diagram INCOMING MAINS VOLTAGE AXIS Q87-E POWER SUPPLY EXTERNAL PROTECTIVE GROUND WIRE Incoming mains voltage External protective ground wire AXIS Q87-E Power Supply Cable Specification Notes: • To maintain the products IP rating, the external diameter of the cables must be 5 - 10 mm. -
Page 10: Technical Specifications
Overvoltage Category (OVC) Fuses AXIS Q87-E Power Supply 230 V AC: F1 = 2 AT, F2 = 8 AT AXIS Q87-E Power Supply 120 V AC: F1 = 3,15 AT, F2 = 8 AT Approvals EN 55022 Class A, EN 55024,... - Page 12 Installation Guide Ver.1.3 AXIS Q87-E 230/120 V AC Printed: May 2013 © Axis Communications AB, 2013 Part No. 52135...
Need help?
Do you have a question about the AXIS Q87-E and is the answer not in the manual?
Questions and answers