General Care and Safety Guide Thank you for choosing this Goldair product. This Goldair appliance has been designed and manufactured to high standards of engineering and with proper use and care, as described in this leaflet, will give you years of useful service.
Page 3
Components Assembly Step 1 - Unscrew the Base Locking Screw Step 3 - Take off Guard Lock Nut from and Ring from the stand Pole and insert motor shaft. Place the Rear Guard on the the stand Pole through the hole in the front of the motor housing.
Fan. PROOF OF PURCHASE To receive warranty retain receipt as proof of purchase. (Refer to back of booklet). SUPPORT AND TECHNICAL ADVICE Goldair – New Zealand Goldair – Australia Monday – Friday 8am-5pm Monday – Friday 8am-5pm Phone +64 (0)9 917 4000...
In non-domestic use Goldair Venti limits the voluntary warranty to three months. Goldair Venti undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period.