Table of Contents
Advertisement
1. SAFETY RULES
Piping installation for a central vacuum system is not complicated. All that is required is to
have a few hand tools and to read the instructions carefully. However, it is essential to do
the installation carefully and safely. We recommend that you read the next few lines with the
greatest attention.
FIRE PROTECTION
Every installation must conform to local and/or provincial and/or federal building and
•
fire codes.
Be sure to take these codes into account when installing your system and hire a plumber
•
if you have any doubt about the procedures to obtain best performance from your
central system.
MORTAL DANGER!
Pay attention when working inside panels or walls that can hide or
contain water or gas pipes or electrical components!
SAFETY EQUIPMENT
To prepare walls or drill holes in floors, be sure to wear recommended safety equipment
•
such as a hard hat, work gloves and safety glasses.
Please ensure that the stability and solidity of a wall is not compromised by creating
•
holes and openings for piping to pass through.
All holes and openings must be properly cut and de-burred.
•
If the piping must cross a firewall, appropriate regulatory safety measures must be
•
taken. In a firewall, piping and vacuum inlets must usually be made of metal. The
foundation must not be compromised when installing the piping network. Consult the
building code for your region.
LOW VOLTAGE REMOTE CONTROL
MORTAL DANGER!
Low voltage is only supplied when voltage is supplied to the power unit.
Low voltage remote control wiring must never come into contact with
another power source.
NOTE
an electrician's help is recommended but not required
»
when working with the low voltage control lines.
3 | MIH-PIPING01-EN
INSPECTION OF POWER UNIT
The Power Unit and all connections should be inspected before starting and at regular
intervals to ensure normal, reliable and safe operation.
WARNING!
Take ownership of a central vacuum system only if it is in good condition; safety of
the equipment is compromised if it is damaged.
ctive central vacuum system must be disabled and disconnected from the electric
•
A defe
power source.
Repairs must be made by a qualified technician, and defective components must be
•
replaced exclusively with genuine Nuera Air parts.
DANGER: FIRE AND EXPLOSION!
NEVER VACUUM UP:
Liquids (unless specified)
•
Explosive materials
•
Solvents (paint or other)
•
Gasoline, fuel, diesel
•
Combustible materials
•
RISK OF INJURY
Be careful when handling in a traffic area; passersby may trip over the hose.
•
Roll up the hose when moving it.
•
Never leave the hose connected while unattended.
WARNING!
Ignoring safety rules risks creating a hazard to your health and to those
around you!
ORIGINAL INSTRUCTIONS
Advertisement
Table of Contents
