Wolf MDD30TM Use & Care Manual page 10

MICROWAVE OVEN OPERATION
Settings
The settings feature allows the user to select individual pref-
erences. Preferences must be reset after a power outage.
AUDIBLE SIGNAL
An audible signal will chime with every touch and upon cook
time and timer completion.
To eliminate signal:
Touch SETTINGS.
1
Touch DECREASE.
2
Touch START. 'SOUND OFF' will appear on the control
3
panel display.
To restore signal:
Touch SETTINGS.
1
Touch INCREASE.
2
Touch START. 'SOUND ON' will appear on the control
3
panel display.
COOK TIME COMPLETION REMINDER
Upon completion, the microwave oven will chime every
ten seconds for the first minute; then every three minutes
(for one hour) until STOP/CLEAR is touched.
To eliminate reminder:
Touch SETTINGS twice.
1
Touch DECREASE.
2
Touch START. 'REMIND SIGNAL OFF' will appear on the
3
control panel display.
To restore reminder:
Touch SETTINGS twice.
1
Touch INCREASE.
2
Touch START. 'REMIND SIGNAL ON' will appear on the
3
control panel display.
|
10 Wolf Customer Care 800.222.7820
WEIGHT UNIT
For cooking modes where weight is required, the default
unit of measure can be changed from pounds to kilograms.
To change unit of measure to kilograms:
Touch SETTINGS three times.
1
Touch DECREASE.
2
Touch START. 'KGS SET' will appear on the control panel
3
display.
To change unit of measure to pounds:
Touch SETTINGS three times.
1
Touch INCREASE.
2
Touch START. 'LBS SET' will appear on the control panel
3
display.
FACTORY SETTINGS
To restore the microwave oven to factory settings:
Touch SETTINGS four times.
1
Touch START. 'FACTORY SETTINGS RESTORED' will
2
appear on the control panel display.
DEMONSTRATION MODE
Demonstration mode allows operation to be demonstrated
without power to the microwave oven.
To enter demonstration mode:
Touch SETTINGS five times.
1
Touch INCREASE.
2
Touch START. 'DEMO ON' will appear on the control
3
panel display. 'DEMO' will remain on the display.
To exit demonstration mode:
Touch SETTINGS five times.
1
Touch DECREASE.
2
Touch START. 'DEMO OFF' will appear on the control
3
panel display.