VPI SE-15V-2-2U1C-TTL Installation Manual

VPI
VIDEO
PRODUCTS
INCORPORATED
INSTALLATION GUIDE FOR THE 2-PORT TTL VIDEO ONLY SWITCH

INTRODUCTION

The VPI 2-port "TTL" controlled video only switch allows one (1) CPU to switch two (2) monitors (model SE-15V-2-2U1C-TTL) or
one (1) monitor to be switched to two (2) computers (model SE-15V-2-2C1U-TTL). All VPI 2-port "TTL" controlled video only
switches are available for VGA video with 150MHz bandwidth and 1600X1200 resolution.

INSTALLATION

1. Turn OFF power to CPU(s) and monitor(s).
FOR MODEL SE-15V-2-2C1U-TTL
2a. Using the supplied video cable, connect the video port of one
CPU to the "VIDEO 1" port on the unit.
NOTE: It will be necessary to repeat this step on the "VIDEO 2"
port with another VEXT-xx video cable that must be
purchased separately.
3a. Connect the monitor using its existing video cable to the "MONITOR"
port on the unit.
FOR MODEL SE-15V-2-2U1C-TTL
2b. Using the supplied video cable, connect the video port of the
CPU to the "VIDEO" port on the switch.
3b. Connect the monitors using their existing video cables to ports
"MONITOR 1" and "MONITOR 2" on the switch.
NOTE: Using a VEXT-xx video cable the monitor cable(s) can
be extended up to 250 feet (sold separately).
4. Plug in the SE-15V-2-2x1y-TTL switch and power it up.
5. Apply power to the CPU(s) and monitor(s).
Aurora,Ohio 44202
1275 Danner Drive
Tel: 330-562-7070 Fax: 330-562-1999
www.vpi.us
SE-15V-2-2U1C-TTL / SE-15V-2-2C1U-TTL
VGA
Multi-Scan
Monitor
EXISTING CABLE
(supplied)
PC
Windows Keyboard & Mouse
VGA
Multi-Scan
Monitor
EXISTING CABLE
VGA
Multi-Scan
Monitor
1
REAR VIEW OF
SE-15V-2-2C1U-TTL
MONITOR
VIDEO 1 VIDEO 2
VEXT-6 VEXT-xx
PC
Windows Keyboard & Mouse
REAR VIEW OF
SE-15V-2-2U1C-TTL
MONITOR 1 MONITOR 2 VIDEO
VEXT-xx
PC
Windows Keyboard & Mouse
5VDC
2.5A
-
+
5VDC
2.5A
-
+
VEXT-6
(supplied)