Table of Contents
Advertisement
Set the Hotspot's LAN IP Address
To set the hotspot's LAN IP address:
1.
Launch a web browser from a computer or WiFi device that is connected to the hotspot
network.
2.
Enter http://netgear.aroundtown or http://192.168.1.1 in the address field of the web
browser.
The hotspot web page displays.
3.
Enter the admin login password in the Sign In field.
The default password is password. The password is case-sensitive.
4.
Click the Sign In button.
The Sign In section closes.
5.
Select Settings > Router > Basic.
6.
In the LAN section, enter an IP address in the IP Address field.
The Submit button displays after you make a selection.
7.
Click the Submit button.
Your changes are saved.
Configure the Hotspot's Netmask
The hotspot's netmask is the routing hardware's internal LAN subnet mask.
Around Town LTE Mobile Internet
Advanced Settings
114
Advertisement
Table of Contents
