Table of Contents
Advertisement
Always choose a safe location for the Fan, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the unit
before use. This appliance requires no installation, it should be used solely as
a portable appliance.
ASSEMBLING YOUR FAN:
Before using the Fan the base (supplied separately
in the carton), must be fitted to the unit.
Insert the stand body (3) into the base cover (2)
and then fit it to the base plate (1).
Lead the power cord through the recess at the
back of the base plate and base cover.
Press down on the stand body firmly until you hear
it click into place on the base plate and cover.
Note: Ensure the stand body is completely
interlocked with the base unit.
Assembling your Fan
Pull the extension pipe (5) to the desired height by
pushing the adjustment button (6) and moving the
pipe to the desired height.
Attach the rear guard (9) to the front side of the
motor housing (7) fasten the guard nut (10) by
turning it clockwise until the guard is secured firmly
in place on the motor housing.
Mount the fan blade (11) onto the Axis (8), slide the
blade nut (12) onto the axis and fasten the fan
blade by turning it anti-clockwise firmly.
Open the front guard clips and slide the front guard
(13) onto the axis. Push the round edges of front
guard to fit it securely into the rear guard then latch
the guard clips down onto the rear guard to lock it
into place.
Advertisement
Table of Contents
