Download Print this page

Supra TRAC-Lock BT Installation Instructions page 3

Advertisement

provided six #4 × 1/2 in. (13 mm) flat head screws
into the predrilled holes. Hand-tighten the upper
right corner screw and continue hand-tightening
the remaining screws in a clockwise order. Do not
overtighten the screws, as doing so may damage the
electronics enclosure and prevent the lid from being
securely fastened.
13. Install the plastic weather cover.
14. Record the TRAC-Lock BT serial number and
installation location.
Battery removal/disposal
This product contains three 9-volt batteries. To remove
the batteries:
1. Remove the lid from the electronics enclosure.
2. Pull the batteries out of the slots.
For proper recycling, dispose of all batteries as required
by local ordinances or regulations.
FCC
The device, Assy, Bezel, WTI, part number
10102917G1, complies with part 15 of the FCC rules.
Operation is subject to the following conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
2002/96/EC (WEEE directive). Products marked with
this symbol cannot be disposed of as unsorted municipal
waste in the European Union. For proper recycling,
return this product to your local supplier upon the
purchase of equivalent new equipment, or dispose of it
at designated collection points.
Supra: 800-547-0252 • www.suprasystems.com
including interference that may cause undesired
operation.

Advertisement

loading