Operating your Fan
Fan control switch
The control switch positions are:
• 0 = OFF
•
• 1 = Low Speed
•
Place the Fan on a dry, level and sturdy
surface.
Plug the power cord into the socket, making
sure the speed control is at OFF position.
To operate the fan turn speed control dial
clockwise
until
desired
achieved.
Adjust tilt by turning neck piece assembly (9)
and tilting body to the desired wind direction
(i.e. either upward or downward).
To activate the oscillation function, push
down the oscillation pin (7) on the top of the
motor. The fan will then oscillate until the pin
is pulled back up.
2 = Medium Speed
3 = High Speed
wind
speed
is