Stand Installa On - Overlord Computer Tempest X270OC User Manual

Parts/Tools Required
‐ Stand
‐ Base
‐ 4 countersunk screws for a aching the
stand to the monitor VESA Mount
‐ 4 round head screws for a aching the base
to the stand
‐ Phillips screwdriver
‐ Drink (op onal)
CAUTION!
‐ This is extremely easy—so watch out! Firmly ghten the
installa on screws.
A aching the Stand
Remove all packaging materials before star ng work. To pre‐
vent the table (etc.) from being damaged by the stand pedes‐
tal, spread a thick, so cloth (blanket, etc.) and work on the
cloth.
1. Lay the monitor flat on a so , flat surface. A ach the stand
to the monitor's VESA mount with the 4 countersunk
phillips screws (the longer ones).
2. Take a sip of your drink (op onal step).
3. A ach the base to the stand with the 4 round head phillips
screws (the shorter ones).
4. Take a sip of your drink (op onal step).
5. Place the base on a flat surface for viewing (you cannot
view the monitor while it's laying on its face).
Your Tempest X270OC monitor comes with a 100mm x
100mm VESA moun ng pa ern.
STAND INSTALLATION
9