Tips And Safety Instructions - Overlord Computer Tempest X270OC User Manual

‐The LCD panel used in this monitor is made with the applica on of high precision technology. However, there may be minute points on the
screen where pixels never light or are permanently lit. Also, if the screen is viewed from an acute angle there may be uneven colors or brightness.
Please note that these are not malfunc ons but common phenomena of LCDs and will not affect the performance of the monitor.
‐ Do not display a s ll picture for a long period, as this could cause a residual image.
‐ Never rub or tap the monitor with hard objects.
‐ Please understand that Overlord Computer, LLC. bears no responsibility for errors made during use by the customer or a third party, nor for any
other malfunc ons or damage to this product arising during use, except where indemnity liability is recognized under law.
‐ This monitor and its accessories may be upgraded without advance no ce.
‐ Do not use the monitor where there is a lot of dust, where humidity is high, or where the monitor may come into contact with oil or steam, as
this could lead to fire.
‐ Ensure that the monitor does not come into contact with water or other fluids. Ensure that no objects such as paper clips or pins enter the mon‐
itor as this could lead to fire or electric shock.
‐ Do not place the monitor on top of unstable objects or in unsafe places. Do not allow the monitor to receive strong shocks or to strongly vibrate.
Causing the monitor to fall or topple over may damage it.
‐ Do not use the monitor near hea ng equipment or in places where there is likelihood of high temperature, as this may lead to genera on of
excessive heat and outbreak of fire.
‐ Do not use the monitor in places where it may be exposed to direct sunlight.
‐ The AC outlet shall be installed near the equipment and shall be easily accessible.
‐ Most of this was covered on Page 4 and we are hoping you get the message by now.
The Power Cord and AC adapter
‐ Use only the power cord and AC adapter supplied with the monitor.
‐ When handling the AC adapter, observe the following: Incorrect handling may result in fire, electric shock, or injury.
• Do not drop the AC adapter or subject it to impact.
• Never disassemble the AC adapter. It contains high voltage parts that are dangerous to touch.
• The AC adapter is for indoor use only. Do not use it outside.
• Do not use the supplied AC adapter with other devices.
‐ Do not damage the power cord and AC adapter nor place heavy objects on it, stretch it or over bend it. Also, do not add extension cords. Dam‐
age to the cord may result in fire or electric shock.
‐ Do not use the power cord with a power tap. Adding an extension cord may lead to fire as a result of overhea ng.
‐ Do not remove or insert the power plug with wet hands. Doing so could result in electric shock.
‐ Unplug the power cord if it is not used for a long me.
‐ Do not a empt to repair the power cord if it is broken or malfunc oning. Refer the servicing to the service representa ve.
‐ Do not stay in contact with the parts of the product and the AC adapter that become hot for long periods of me. Doing so may result in low‐
temperature burns.
‐ Do not fasten the AC adapter to the monitor or other equipment. Doing so may result in fire and electrical shock.
‐ Again, most of this was covered above and on Page 4 so you must get all this by now.
LED Backlight
The LED backlight in this product has a limited life me.
* If the screen gets dark or does not turn on, it may be necessary to replace the LED backlight. This LED backlight is exclusive to this product and
must be replaced by Overlord Computer.
* Please contact Overlord Computer for assistance.
TIPS AND SAFETY INSTRUCTIONS
6