Goldair GCMF220 Operating Instructions Manual page 8

Cleaning and Maintenance
Please clean the misting plate, fan blade
and back guard every month.
Cleaning the misting plate:
Pull out the decorative ring on the misting
plate ①.
Remove the 3 screws from the cover ②.
Pull out the misting plate cover ③.
Remove the 2 screws from the misting
plate base ⑤.
Pull out the misting plate base ⑥.
Pull out the front air louvre ⑦.
Clean each component with a soft cloth
and re-assemble.
Cleaning the fan blade and back guard:
Remove both screws ① on the back guard
②, and take the net clip off.
Take the back guard off.
Remove the nut and nut washer from the
motor axle ③.
Take the fan blade ④ off.
Wash these parts and dry them then re-
assemble.