Goldair GCMF220 Operating Instructions Manual page 6

Operating your Fan
ON/OFF：
Press the on/off button. The fan will start in
natural wind mode, and the fan function
icon will light-up on the screen. The screen
will display the set speed (speed 1). The
Natural wind mode means that the fan
will: run for 2 seconds then stop for 3
seconds. Continue to press the ON/OFF
button to scroll through the settings.
SPEED:
Press the SPEED button, the wind speed
will change to normal wind mode (speed
2), and the screen will display at 2. Press
the button a second time and the wind
speed will display at 3, Press the button a
third time, the wind speed will change to
high power and display at 4. Press the
button a fourth time, the wind will stop and
display at 0. The wind speed will cycle
through normal wind 2-3-4-0 sequence
when pressing the SPEED.
MIST：
Press the MIST button to start the misting
function, the misting icon will light-up.
The misting function works in three modes:
Mode 1: continuous misting.
Mode 2: misting function operates for 3
minutes then stops for 5 minutes.
Mode 3: misting function operates for 5
minutes then stops for 10 minutes.
Press it for a fourth time, the mist will stop
and the misting icon turns off.
The mist function operates separately from
the fan function, so you can use it as
humidifier.
ION：
Press the ION button to start the ION
function, Ion function icon will be light up
on the screen. Press it one more time and
the Ion function will stop and the Ion
function icon turns off.
ROTATE/CHILD LOCK ： While the fan
function is on, press the ROTATE button to
start rotating, the rotation icon will be lit on
the screen. Press it one more time; the
rotation will stop and the rotation function
icon is off. Please note that when the fan
function isn't on, the rotation function can
not be use.
Pressing the ION key for 3 seconds will
activate the CHILD LOCK function, and
pressing it again for 3 seconds will cancel
CHILD LOCK This CHILD LOCK function
can only be used when the fan is on.
TIMER：
While the fan or the misting function is on,
press the TIMER button for time setting.
The screen will display the H icon and
timer icon will be set at 1 hour. The timer
icon setting will increase from 1 hour→
2hours→ 3hours→ and so on to →9hours,
and then →OFF when pressing the Timer
button. This means that the fan or misting
function and the timer icon will be on until
timing off automatically or until you stop it
manually.
Press this key for 3 seconds to turn the
screen light off, the screen will not
illuminate, but the fan will continue to
function. This is designed to avoid excess
light when you sleep. Press it again for 3
seconds to light-up the screen.