Before Plugging In - Kenwood Discovery duo ST60A Instructions Manual

Table of Contents

Advertisement

The iron must be used and rested on a flat
stable surface.
Misuse of your appliance can result in injury.
Children from 8 years and above can use,
clean and perform user maintenance on this
appliance in accordance with the User
Instructions provided they are supervised by
a person responsible for their safety and
have been given instruction concerning the
use of the appliance and are aware of the
hazards.
Persons with reduced physical, sensory or
mental capabilities or lack of knowledge
using this appliance must have been given
supervision or instruction on its safe use and
are aware of the hazards.
Children must not play with the appliance
and both appliance and cord must be out of
reach of children less than 8 years.
Only use the appliance for its intended
domestic use. Kenwood will not accept any
liability if the appliance is subject to improper
use, or failure to comply with these
instructions.

before plugging in

Make sure your electricity supply is
the same as the one shown on the
base of your iron.
Your iron has a dual voltage selector
on the base of the iron. lways
check that you have selected the
correct voltage before using the iron.
Important (UK) only
The wires in the cord are coloured
as follows:
Green and Yellow = Earth
Blue = Neutral
Brown = Live.
The appliance must be protected by
a 13A approved (BS1362) fuse.
W RNING: THIS
MUST BE E RTHED.
PPLI NCE
Note:
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents