Signal Condition; Other Settings - Panasonic TX-42AS650E Ehelp

Signal Condition

Selects a channel and checks the signal condition with indicators.
A good Signal Strength is not an indication of suitable signal for DVB
●
reception.
Vertical lines show the maximum signal value of the selected channel.
●
To change the channel
●
For DVB
●

Other settings

Favourite Network
Selects your favourite network for each broadcaster (only available in some
countries).
For DVB-C, DVB-T
●
Service Replacement
(On / Off)
Set to On to display a message to switch to the available service (only
available in some countries).
For DVB-C
●
Attenuator
(On / Off)
Sets the antenna system to use plural LNBs for receiving several satellites.
If the DVB-C signal is too strong, the interference may occur. In this case,
●
set to On to weaken the signal automatically.
Add TV Signal
Adds the TV mode.
This function is available if you skip any modes to tune in
●
first using the TV.
- 85 -
Auto Setup for