3D Mode Selection - Panasonic TX-42AS650E Ehelp

3D Mode Selection

You can easily change the viewing mode between 2D and 3D with 3D.
1. Display 3D Mode Selection
2. Select the mode with
Items of 3D Mode Selection
●
3D / 2D:
Displays the appropriate image as you desire without selecting 3D format.
This mode may not work properly depending on the source image
●
format. In this case, select the appropriate 3D format manually.
■
To change 3D format manually
When the image is not changed properly using
manual setting.
1. Display 3D Mode Selection (Manual)
operation.
2. Select the mode with
Original:
Displays the source image as it is.
Use to identify the format type of the source image.
●
Watching > 3D > Source image format
Side by Side - 3D
Top and Bottom -
Displays the mode you select.
Not valid in Analogue and AV mode
●
2D→3D:
Converts 2D images into 3D.
Please note the 3D images appear slightly different from the
●
originals.
Using this function for profit-making purposes, or publically showing
●
images converted from 2D to 3D in places such as shops or hotels,
etc. may infringe on the rights of the copyright holder protected
under copyright law.
with 3D.
/ and press
vary depending on the condition.
with
/ and press
/ Side by Side - 2D
2D:
- 74 -
OK to set.
3D / 2D mode, use this
(red) during above
OK to set.
/ Top and Bottom - 3D /