Page 2
The FBR-1GE2LX-SFP converts any packet received from either optical link and addressed to the IP address of a device connected to the unit’s UTP port, to a single 10/100/1000base-T/TX Ethernet output. The FBR-1GE2LX-SFP also passes through any packet received from either fiber link to the other fiber link, based on the destination address.
Page 3
SFP module. Refer to the instructions supplied with the SFP modules for the proper procedure of installing the SFP modules in the FBR-1GE2LX-SFP unit, as well as for the proper procedure for connecting the fibers to the SFP modules.
Page 4
ETHERNET INDICATORS Two LED indicators on the RJ-45 connector of the FBR-1GE2LX-SFP unit monitor the status and operating mode of the UTP Ethernet link. The Ethernet status associated with these indicators is summarized below. Ethernet Indicators Ethernet Status Speed Lit Amber: Link operating at 1000Mbps...
Page 6
Aventura Technologies, Inc. in their original or equivalent packaging, prepay shipping charges, and insure the shipment or accept the risk of loss or damage during shipment. Aventura Technologies, Inc. will ship the repaired or replacement products to you freight prepaid if you use an address in the continental United States, where applicable.
Need help?
Do you have a question about the FBR-1GE2LX-SFP and is the answer not in the manual?
Questions and answers