Advertisement
Quick Links
Revised April 2015
Mini Amp Kit
13-A07/13-A08
installation instructions
included:
tools needed:
Mini Amp
Phillips Screw Driver
Speakers
Wire Stripper
Wired Input
Crimp Tool
Blue tooth Input
Madjax recommends professional installation. If you choose to not have this product installed
1
by a professional, we highly recommend that you exercise caution, care, and patience when
installing this product.
Make sure your cart's TOW/RUN switch is in the tow position.
2
Locate where you would like to mount your mini amp.
Note: Do not mount in battery box if you are using the blue
tooth Receiver
3
Run your wires for your power source and ground to the amp.
Note: We recommend using a MJ1612VR or MJ1230C
converter to insure a clean 12V input.
Mini Amp
Speakers
Wired Input
Blue tooth Input
Advertisement
Summary of Contents for MadJax 13-A07
-
Page 1: Installation Instructions
Speakers Wired Input Blue tooth Input Madjax recommends professional installation. If you choose to not have this product installed by a professional, we highly recommend that you exercise caution, care, and patience when installing this product. Make sure your cart’s TOW/RUN switch is in the tow position. - Page 2 Madjax product is compatible. Madjax products are aftermarket parts and are not original equipment parts. Madjax is not connected to, affiliated with, sponsored by, or endorsed by either...