Dodge Dart 2014 Owner's Manual page 139

NOTE: If other phones are present during the pairing
process make sure they are switched to off or the
bluetooth is disabled before proceeding.
The following are general phone to Uconnect® Phone
pairing instructions:
• Press the
button to begin.
• After the "Ready" prompt and the following beep, say
"Device Pairing".
• When prompted, after the beep, say "Pair a Device"
and follow the audible prompts.
• For identification purposes, you will be prompted to
give the Uconnect® Phone a name for your mobile
phone. Each mobile phone that is paired should be
given a unique phone name.
• You will then be asked "Should paired device be set as
Favorite?" If yes this phone will become the highest
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137
priority. You can pair up to seven mobile phones to
your Uconnect® Phone. However, at any given time,
only one mobile phone can be in use, connected to
your Uconnect® System. The priority allows the
Uconnect® Phone to know which mobile phone to use
if multiple mobile phones are in the vehicle at the same
time.
• Start paring procedure on device. See device manual
for instructions.
• Select Uconnect® on the device and enter the four-
digit Personal Identification Number (PIN) displayed
on radio into your mobile phone.
Dial By Saying A Number
• Press the
button to begin.
• After the "Ready" prompt and the following beep, say
"Dial."
3