Fiat 500 2013 User Manual page 55

WHAT TO DO IN EMERGENCIES
NOTE:
There are front and rear jacking locations on each side of the body (as indicated by the
triangular lift point symbol on the sill molding).
Do not raise the vehicle until
you are sure the jack is securely
engaged.
3. Turn the jack screw to the left until the jack can be placed under the jacking location.
Once the jack is positioned, turn the jack screw to the right until the jack head is
properly engaged with the lift area closest to the wheel to be changed.
4. Using the swivel wrench, raise the vehicle
by turning the jack screw to the right.
Raise the vehicle only until the tire just
clears the surface and enough clearance
is obtained to install the spare tire. Mini-
mum tire lift provides maximum stability.
5. Remove the wheel bolts and pull the
wheel off the hub. For vehicles equipped
with aluminum wheels, the center caps
must be removed to remove the wheel
bolts.
NOTE:
The wheel cover is held on the wheel by the wheel bolts. When reinstalling the original
wheel, properly align the wheel cover to the valve stem, place the wheel cover onto the
wheel, then install the wheel bolts.
53