Table of Contents
Advertisement
FRONT PANEL FEATURES
1.
FILTER/LFO (FLANGER):
controls for the filter/flanger effects. The ACTIVATE button switches the effect on and off. The SET button can be
used to change the BEATS trigger value or access the edit features of the FILTER/FLANGER.
2.
DELAY:
This section features LEVEL (REPRO), REPEAT and SPEED controls for the delay effect. The
ACTIVATE button switches this effect on and off. The SET button can be used to change the BEATS trigger value or
access the edit features of the DELAY.
3.
TAP (CLEAR BPM):
4.
NUDGE:
These buttons are used to make fine, manual adjustments to the BPM value and shift the audio/effect
trigger sync point. Also used for general data entry.
5.
SUPERKILL:
These two buttons select the DSP Fazed and Bass filtering.
6.
BEATS:
This section features 8 buttons. In Select mode, they are used to set the BEATS synchronisation
setting of the effects. In Program mode they are used to recall, compare and save the effect programs. In Pattern
Record mode they are used to record, delete and edit events.
7.
USER BEATS:
This section features 3 buttons. Buttons 1 and 2 store and recall the custom user patterns.
W
hen the 'LIVE' button is selected, the TAP button can be used to manually trigger effects 'on the fly'.
8.
PROGRAM (BAR LOOP):
BEATS record mode, this button also selects BAR LOOP mode.
9.
MASTER ON/OFF:
10.
PANNING:
This section features SPS, 2-WAY SPLIT and SPEED controls for the panning effect. The
ACTIVATE button switches this effect on and off. The SET button can be used to change the BEATS trigger value or
access the edit features of the PANNER.
11.
CUTTER:
This section features SHAPE, DEPTH and SPEED controls for the cutter effect. The ACTIVATE
button switches this effect on and off. The SET button is used to change the BEATS trigger value of the CUTTER.
12.
MONITOR:
This feature lets you monitor the activated effects at the pre-Master on stage, allowing you to
check the effects setup before committing it to the master output. The MONITOR control adjusts the output level.
13.
UTILITY:
This button lets you access utility parameters such as Input Gain, Effects Configuration, BPM range,
MIDI Channel etc.
14.
SYNCHRONISATION:
15.
BPM Display:
The four digit BPM reading of the audio signal will be displayed here. Also, information will be
displayed in Pattern, Program, Utility and Effect edit modes.
16.
INPUT LEVEL:
The four bi-colour input indicators are used to check the audio input level status.
17.
FX MIXER:
This joystick control
position, all activated effects will be heard equally. Moving the joystick about its axis will vary the balance of the
activated effects.
18.
PATTERN SET:
In USER BEATS record pause mode, this button selects between SET PATTERN LENGTH
(LED flashing) and SET QUANTIZE (LED on).
This section features FREQUENCY, RESONANCE, ENVELOPE MOD and SPEED
This button is used to manually 'tap' in a tempo or clear the current BPM reading.
This button is used to select Program mode and MIDI clock control mode . In USER
This button is used to switch the activated (or cued) effects on and off.
This 3-way indicator shows any audio/effect synchronisation adjustments.
adjusts the relative balance between the activated effects. At the centre
Front Panel Features
OWNERS MANUAL
3
Advertisement
Table of Contents
