Table of Contents
Advertisement
User Instructions
Before first use
Before using your appliance for the first time:
Set the water softener
Add 1.5Kg dishwasher salt and then
the salt container with water
Fill the rinse aid dispenser
Fill in detergent
Water Softener
The dishwasher is designed with a softener to
eliminate the minerals and lime from the water
supply. The hardness of the water supply varies
from place to place and will affect the
dishwasher performance. The amount of salt
consumed can be adjusted based on the
hardness of the water used. This is intended to
optimise and customize the level of salt
consumption.
Adjusting salt consumption
1. Unscrew and remove the cap from the salt
container.
2. There is a ring on the container with an arrow.
Rotate the ring in anticlockwise direction from
"-" sign towards "+" sign, based on the table at
right.
Loading the salt into softener
1. Remove the lower basket and then unscrew
and remove the cap from the salt container.
(Fig 1)
2. Place the end of the funnel(supplied) into the
hole and introduce about 1.5kg of dishwasher
salt.
3. Full fill the salt container with water.It is normal
for a small amount of water to come out of the
salt container. (Fig 2)
4. Screw the cap tightly back clockwise.
5. Immediately after filling the salt, a washing
cycle should be started (soak or rapid
program suggested). Otherwise the filter
system or pump may be damaged by salty
water.
Important:
Only use dishwasher salt
Add the salt again when the salt warning light
at control panel is on.
It takes time to dissolve the salt so the salt
warning light may still come on even the salt
container is filled.
full fill
Water
hardness
(°
Clarke)
0 ~ 10
10 ~ 28
28 ~ 56
56 ~ 75
Selector
Salt
position
consumption
(gram/cycle)
/
0
-
20
Mid
40
+
60
Autonomy
(cycle/
1kg)
/
50
25
16
8
Hide quick links:
Advertisement
Table of Contents
