Protek Super Pro 20 User Manual

Thank you for purchasing the ProTek R/C "Super Pro 20" Power Supply. This is one of the most powerful, easy to
operate, feature packed power supplies available. When properly cared for, the Super Pro 20 power supply will provide
you with years of efficient and reliable operation.

Operating Instructions:


Ensure that no load is connected to the power supply before connecting to a 110V AC power source

Always place on a stable, flat surface

Do not overload the power supply (no more than a 20 Amp load)

Each switched output can deliver a maximum of 16 amps

Verify the correct polarity of the output terminals before connecting any device (Red = Positive / Black =
Negative) and Do not reverse the polarity

Verify that the LED is on and that the cooling fan is operating

The power supply may become warm during operation or emit a slight buzzing sound, this is normal. If the unit
becomes hot to the touch, disconnect immediately

The power cord can be replaced with any computer power supply cord so that it may be used in different
countries

Safety Precautions:


Do not leave the power supply unsupervised while in use

Keep power supply away from heavy vibration, moisture, dust, or excessive heat

Do not move the power supply while in use

Do not operate near fire or water

Use care when transporting to avoid any kind of impact

Do not operate with wet hands

Do not modify, disassemble, or service the power supply, this will void the warranty

Do not use the power supply to charge a battery, or connect a battery directly to the terminals

Do not connect incompatible chargers to the power supply (do not exceed the amperage load)