Running Lights - Mini COUNTRYMAN Owner's Manual

MOBILITY
To remove the cover:
1. Press the tab.
2. Fold away the cover and take it out of the
holder.
Proceed in reverse order to attach the cover.
Attach the cover carefully
When attaching the cover, proceed care‐
fully; otherwise, leaks may occur, causing dam‐
age to the headlamp
Replacing the bulb
1. Turn the bulb counterclockwise, arrow 1,
and remove it, arrow 2.
2. Press the release, arrow 1, and pull off the
connector, arrow 2.
238
Replacing components
system.◀
Online Edition for Part no. 01 40 2 961 110 - II/15
3. Insert the new bulb and attach the cover in
reverse order.
LED parking lights/LED fog lights/LED
daytime running lights
Follow the general instructions on lamps and
bulbs, refer to page 236.
Lights are implemented using LED technology.
Contact your service center in the event of a
malfunction.
Turn signals/parking lights/roadside
parking lights/fog lights/and daytime

running lights

Access to the bulbs via the wheel housing
Follow the general instructions on lamps and
bulbs, refer to page 236.
1 Turn signal
2 Parking lights/roadside parking lights/fog
lights/and daytime running lights
Replacing the turn signal bulb
21-watt bulb, P 21 W, or PY 21 W
1. Turn the wheel.
2. Remove cover 1.
To do this, turn the cover counterclockwise.