Changing The Is Mode Settings - Canon IXUS 172 User Manual

Changing the Screen Displayed after Shots
Change the way images are displayed after shots as follows.
1
Set [Display Time] to [2 sec.],
2
Configure the setting.
z
Off Displays only the image.
Detailed Displays shooting details
• When [Display Time] (= 57) is set to [Off] or [Quick], [Display Info] is set to
[Off] and cannot be changed.
•
By pressing the <p> button while an image is displayed after shooting, you
can switch the display information. Note that the settings of [Display Info]
are not changed. You can also erase images by pressing the <o> button, or
protect images (= 65) by pressing the <m> button.
Downloaded From camera-usermanual.com Canon Manuals
[4 sec.], [8 sec.], or [Hold]
(= 5 7).
z Choose [Display Info], and then choose
the desired option (= 22).
(= 103).
IXUS 170 IXUS 165

Changing the IS Mode Settings

1
Access the setting screen.
z z Press the <n> button, choose [IS
Settings] on the [4] tab, and then press
the <m> button
2
Configure the setting.
z z Choose [IS Mode], and then choose the
desired option
Optimal image stabilization for the shooting conditions is automatically
Continuous
applied (Intelligent IS) (=
Shoot Only* Image stabilization is active only at the moment of shooting.
Off Deactivates image stabilization.
* The setting is changed to [Continuous] for movie recording.
•
If image stabilization cannot prevent camera shake, mount the
camera on a tripod or take other measures to hold it still. In this
case, set [IS Mode] to [Off].
Still Images Movies
(= 22).
(= 22).
28).
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Playback Mode Playback Mode
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
58