Table of Contents
Advertisement
Advanced
This page describes how to set up the initial string for the modem con-
nected to the SERIAL 1 port of the PalmRouter Elite. You can use the pre-
defined setting on the pull-down list if your modem appears on the list, or set
up the modem initial string manually. Please refer to the user's manual of your
modem for the initial string configuration.
Note:
Unlike most modems, ISDN initial strings vary between different
ISDN TAs and there is no "Standard ISDN TA" initial string. If your
ISDN TA is not listed in the modem selection list, you must set up the
ISDN TA initial string by yourself. The initial string should be listed in
your ISDN TA user's manual. There are probably many initial strings
listed for your ISDN TA. The one you are looking for is Asyn-to-Sync
PPP (Asynchronous to Synchronous PPP). You can enter this initial
string if only one channel of you ISDN TA will be used. If you would
like to bundle both channels of your ISDN TA together, you should
use the initial string for Multilink-PPP instead.
Advanced Configuration
22
Advertisement
Table of Contents
