Panasonic SC-ALL2 Operating Instructions Manual page 13

Using an Internet browser
≥ The following steps are based on a smartphone.
≥ Do not connect a LAN cable. Doing so will disable the Wi-Fi
1
Turn this unit on.
2
Go to Wi-Fi
≥ Proceed to the next step after the network indicator changes from blinking in
blue and red to blinking slowly in blue
§ The blinking in blue starts after approximately 1 minute. If the blinking in
blue does not start, perform a network reset. (l 16)
settings on the device.
®
Settings
.
§
Wi-Fi Settings
- 13 -
function.
®