Operation Instructions; General Instructions; Control Buttons - Dell E177FPc Service Manual

17" LCD Color Monitor

3. Operation instructions

3.1 General Instructions

Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the
monitor. By changing these settings, the picture can be adjusted to your personal preferences.
- The power cord should be connected.
- Connect the video cable from the monitor to the video card.
- Press the power button to turn on the monitor, the power indicator will light up.

3.2 Control Buttons

A
MENU
B
Brightness/Contrast Hot Key
B C
- and + buttons
C
Auto Adjust
D
Power Button & Indicator
1
2
3
4
The 'MENU' button is used to open the on-screen display (OSD), select
function icons, exit from menus and sub-menus, and to exit the OSD.
See Accessing the Menu System.
Use this button for direct access to the 'Brightness' and 'Contrast' control
menu.
Use these buttons to adjust (decrease/increase ranges) items in the OSD.
Use this button to activate automatic setup and adjustment. The following
dialog will appear on screen as the monitor self-adjusts to the current input:
Auto Adjustment button allows the monitor to self-adjust to the
incoming video signal. After using 'Auto Adjustment', you can further tune
your monitor by using the 'Pixel Clock' and 'Phase' controls in the OSD.
The green LED indicates the monitor is on and fully functional. An amber
LED indicates DPMS power save mode.
The Power button turns the monitor on and off.
7
Menu selection button
Brightness Contrast / Down (-) button
Auto-Adjust / Up (+) button
Power button On/Off button with indicator
Auto Adjust In Progress
Dell E177FPc