Mackie Onyx 400F Owner's Manual page 19

5. The Onyx F Series Windows XP Installer window
opens. Click "Install" to continue.
6. When the installation is completed, the Onyx F
Series Windows Drivers Setup window indicates
that the "Setup was completed successfully." Click
"Next" to continue.
7. The "Install Complete" window opens. Click "Finish"
to complete the installation.
8. Connect the Onyx 400F to your computer with the
FireWire cable that was included in the box and
turn it on.
9. After a few seconds, the "Found New Hardware
Wizard" opens. Select "No, not this time" where it
asks to connect to Windows Update. Click "Next"
to continue.
10. In the next window, select "Install the software
automatically (Recommended)" and click "Next" to
continue.
11. As the installation continues, you may see a warn-
ing that the software has not passed Windows Logo
testing. It's okay. Click "Continue Anyway."
19
Owner's Manual