Led Information - Cradlepoint AER3100 Quick Start Manual

LED Information

POWER The Cradlepoint AER3100/AER3150 must be powered using an approved 54V DC power
source.
• Green = Powered ON.
• No Light = Not receiving power. Check the power switch and the power source connection.
• Flashing Amber = Attention. Open the administration pages (see page 12) and check the
router status.
ETHERNET WAN Indicates information about a data source connected to the Ethernet WAN
port.
• Blue = Connected to an active Ethernet WAN interface.
VPN Indicates information about a VPN data source.
• Green = Active VPN tunnel.
WiFi BROADCAST (only on AER3100) These two LEDs indicate activity on the WiFi
broadcast for both the 2.4 GHz and 5 GHz bands.
• 2.4GHz (green) = 2.4 GHz WiFi is on and operating normally.
• 5GHz (blue) = 5 GHz WiFi is on and operating normally.
6