Preparing For Flight - Swann Xtreem Micro Attack Instruction Manual

Preparing for Flight

1
3
OR
Open the charging lead compartment located on the
underside of the remote control and extend the lead to
charge.
4
2
• Before the helicopter can be charged,
it must be switched off - make sure the
ON/OFF switch is in the OFF position.
• If charging with the computer, make
sure it is turned on.
• The charging plug only fits into the
helicopter one way. Do not force it in.
• You'll know the helicopter is fully
charged once the red indicator light
glows on the USB connector. Promptly
remove the charging plug once
charging is complete.
• Charge time varies depending on
the helicopter's battery conditions. It
typically takes 45 to 60 minutes to fully
charge from empty.
• It may take longer to charge the
helicopter with the controller. This
method relies on the controller's
remaining battery power capacity.
• You do not have to fully charge the
helicopter to fly. Shorter charge time
will result in reduced flying time.
Preparing for Flight
4
5
Stable, level surface
6 7
Select a frequency using the band selector
switch. Push the throttle stick down and
aim the controller's IR transmitter at the
helicopter. Move the throttle stick up then
down again. Pairing is now complete.
5