Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for KTI Networks KPW-1012-D
Summary of Contents for KTI Networks KPW-1012-D
- Page 1 KPW-1012-D Din-Rail AC-DC 12V Power Supply User s Manual DOC.131030...
- Page 2 KTI Networks Inc. KTI Networks Inc. reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of KTI Networks Inc. to provide notification of such revision or change.
- Page 3 The information contained in this document is subject to change without prior notice. Copyright (C) All Rights Reserved. FCC NOTICE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including the interference that may cause undesired operation.
-
Page 4: Specifications
Specifications AC Power Input Interfaces IEC320 receptacle Rated Input Voltage 100 ~ 240VAC No load Consumption < 0.3W DC Power Output Interfaces Type 1: Screw-type terminal block (Vout＋, Vout－) Type 2: DC plug via the bundled DC plug cable ＋12VDC (＋/－1%), 0.85A max. Output Power Protection Short Circuit, Over Load, Over Voltage... - Page 5 Environmental Operating Temperature －25 C ~＋70 －40 Storage Temperature C ~＋85 Relative Humidity 10% ~ 90% non-condensing Internal Power Module Approvals Safety Certification UL 60601-1, IEC60601-1, EN 60601-1 UL 60950-1, IEC 60950-1, EN 60950-1 Electrical Approvals Part 15 rule Class A CE EMC EN55022/2006+A1/2007 EN61000-3-2/2006...
-
Page 6: Installation
Installation Unpacking The product package contains: The power supply unit One DC plug cable DIN-Rail mounting bracket One product CD-ROM One AC power cord Safety Cautions To reduce the risk of bodily injury, electrical shock, fire and damage to the product, observe the following precautions. -
Page 7: Din Rail Mounting
Din-Rail Mounting Install the Din-Rail bracket on the rear panel as shown below: Mount the device unit on a Din-Rail as shown below:... -
Page 8: Panel Mounting
Final Dimension after Installation Panel Mounting An optional panel mounting bracket supports mounting the power supply on a plane surface securely. - Page 9 Install the bracket onto the device unit as shown below and use two screw holes to fix the unit on a plane surface: Final Dimension after Installation...
-
Page 10: Ac Power Input
AC Power Input The power supply provides IEC320 for receiving AC power input. Using IEC320 Interface One AC power cord which meets the specification of your country of origin is supplied in package. Plug the power cord into the IEC320 receptacle properly. -10-... -
Page 11: Dc Power Output
DC Power Output The power supply provides industrial terminal block connectors for installations and one typical DC plug support for commercial installation. Using Terminal Blocks DC OUT ( 2P) ＋terminal －terminal :＋12VDC, 0.85A total max.) Use the supplied 2P plug for DC power wires. Insert and screw the wires securely as shown below: Power wire specification: 24~12AWG (IEC 0.5~2.5mm -11-... - Page 12 Plug the wired DC plug into DC OUT socket as shown below. Using DC plug cable To support the devices which have only DC IN Jack interface, one DC plug cable shown below is supplied. DC Plug Cable -12-...
- Page 13 Insert the cable into DC OUT terminal block of the power unit as illustrated below and uncover any unused contacts. An Example of supplying power to a device with DC Jack. -13-...
Need help?
Do you have a question about the KPW-1012-D and is the answer not in the manual?
Questions and answers