Table of Contents
Advertisement
= Maintain
power tools.
Check for misalignment
or binding
of moving
parts, breakage
of parts and any other condition
that may affect
the
power tool's
operation,
if damaged,
have the power tool repaired
before
use. Many accidents
are caused by poorly maintained
power tools.
=
Keep cutting
tools sharp and clean.
Properly maintained
cutting
tools with
sharp cutting
edges are less likely to bind and are easier to control.
=
Use the power tool, accessories
and tool bits etc., in accordance
with
these
instructions,
taking
into account
the working conditions
and the
work to be performed.
Use of the power tool for operations
different from
those intended could result in a hazardous
situation.
BATTERY
TOOL USE AND CARE
•
Recharge
only with the charger
specified
by the manufacturer.
A
charger that is suitable for one type of battery pack may create a risk of fire
when used with another
battery pack.
=
Use power tools
only with specifically
designated
battery
packs. Use of
any other battery packs may create a risk of injury and fire.
=
When battery
pack is not in use, keep it away from other
metal
objects,
like paper clips, coins,
keys, nails, screws
or other small metal
objects
that can make
a connection
from one terminal
to another.
Shorting
the
battery terminals
together
may cause burns or a fire.
=
Under abusive
conditions,
liquid may be ejected
from the battery;
avoid
contact.
If contact
accidentaNy
occurs,
flush with water. If liquid
contacts
eyes, additionally
seek medical
help. Liquid ejected from the
battery may cause irritation or burns.
SERVICE
Have your power tool serviced
by a qualified
repair
person
using only
identical
replacement
parts. This will ensure that the safety of the power
tool is maintained.
Follow
instructions
in the Maintenance
section
of this manual.
Use of
unauthorized
parts or failure to follow Maintenance
instructions
may create
a risk of shock or injury.
SPECiFiC
SAFETY RULES FOR AUTO=HAMMER
=
Hold power tools
by insulated
gripping surfaces
when performing
an
operation
where
the tool may contact
hidden
wiring
or its own cord.
Contact
with a "live" wire will also make exposed
metal parts of the tool
"live" and shock the operator.
=
Use auxiliary
handle(s),
if supplied
with the tool.
Loss of control can
cause personal injury.
Advertisement
Table of Contents
