Fx Routing - Acuma Labs Pro Audio Lab User Manual

FX Routing

The Plug-in Confi guration Window
Card Slot Column
Plug-in
display toggle display toggle
Card A
Card B
Card C
Card D
Inserting a Plug-in into a Channel
A pre- or post-DSP channel insert can also be used as the input source for a plug-in.
When a channel insert point is selected, the plug-in output returns to the channel by
default. The FX return path is disconnected, although the plug-in output is still dis-
played on the FX return channel meter.
A plug-in channel insert assignment can be made from the Plugin Configuration win-
dow, or from a pull-down menu from the mixer screen.
Plug-in Configuration Window
This assignment can also be made from the control surface and VFD by holding the
desired channel's SELECT button for two seconds, then paging over to Plug Pre or
Plug Post, selecting the input source, then selecting the desired plug-in slot from the
follow-on menu.
Input Source Input Source Input Source
Plug-in
Assignment Assignment
Assignment
Column
Column
Stereo/Mono
Mode Column Close Window
Destination
Assignment
Column
Stereo/Mono
Toggle Button
Post-DSP Pull-down
Pre-DSP Pull-down
User's Guide