Table of Contents
Advertisement
Automation and Snapshot Control
Dynamic Real Time
To write automation on a loaded plug-in:
1. Engage AUTO TOUCH.
2. Engage ALL, disengage BYPASS, and send timecode to the console –the
POSITION readout will change to show time code is being received.
3. Move a parameter or recall a patch (user or factory preset).
Subsequent edits to any recorded automation moves may be performed in the Mix
Editor. Enable the channel view by clicking on the Channel View button, then choose
the plug-in you wish to view from the page drop-down menu. This displays a list of
available channel and plug-in parameters.
Note: Parameters can be controlled from either the GUI plug-in graphic parameters (using
a mouse to modify the parameters) or via the VFD V-Pots and SELECT buttons (with the
plug-in parameters called up on the VFD readout).
Event Based
To automate the loading of a plug-in preset:
• Use the Event Automation Track, available under the Windows Menu as
'Event Track', to load plug-in user (previously stored), or factory preset
patches at a specific time during automation playback.
General Note: Plug-in settings are recalled as part of a console Snapshot, but may also
be recalled as Presets (patches). If you are recalling snapshots and presets, be aware that
one may override the other.
Channel View
Channel View button, then choose
User's Guide
Advertisement
Table of Contents
