Advertisement
Windows2000/XP/VISTA/7/8, no driver setup is necessary .
Please Proceed to step 6.0 to format your drive.
Duplication Mode
I nstall 2 hard drives into the dock. Make sure to place the
·
drive with the data you want copied (Source) into the
"Source" bay. The target disk (Target) should be equal or
larger in capacity than the source disk.
Connect the power adapter to the enclosure and press the
·
POWER button to power up the docking station.
·
A fter about 10 seconds,Keep pushing the CLONE button
for 3 seconds to begin duplication. Clone Progress
indicator(25%,50%,75% and 100%,4 status) Would be acted.
Show as below:
Silkscreen
LED Color
Duplication started
Duplication in progress
Duplication Complete
Note:
1.
Can`t connect the docking station to your computer by
USB cable for duplicator mode.
LED Status
25%
50%
75%
Green
Red
Yellow
Orange
Solid LED for every 25%done
incrementally
LED moving back and forth
All LED remain constantly on
100%
Advertisement
